ＰＣ：３＋７
ＭＡＩＮ ＭＥＮＵ
───────────────────────
Ｆ１ ＡＵＴＯ． ＳＣＡＮ ＭＯＤＥ
Ｆ２
ＳＥＬＥＣＴ ＰＣ
Ｆ３
ＳＥＡＲＣＨ ＰＣ ＮＡＭＥ
Ｆ４
ＥＤＩＴ
ＰＣ ＮＡＭＥ
Ｆ５
ＭＯＲＥ
ＳＹＳＴＥＭ
Ｆ６
ＥＤＩＴ
ＵＮＩＴ／ＰＣ ＰＳＷ．
Ｆ７
ＯＳＤ
ＰＯＳＩＴＩＯＮ
Ｆ８
ＨＥＬＰ
ＰＲＥＳＳ
ＥＳＣ
ＴＯ ＥＸＩＴ
The currently in
Use PC is connected to
the Port 7 of SLAVE and this
SLAVE is cascaded
to the MASTER
Content
1. This operation manual is adapted to Auto Multi-PCs Controller which are available
with OSD (ON SCREEN DISPLAY) support. This series of model can be connected as
a first level of a MASTER unit in cascade configuration.
2. When multi models are cascaded, the one which has a mouse, a keyboard and a
monitor connected to its Console port directly and operated by a user called
“MASTER”; other cascaded models are called “SLAVE”. The console side of each
SLAVE has to be connected to the PC side of MASTER.
3. For these models with built-in OSD (ON SCREEN DISPLAY) control, user can
easily be aware of the system status and operations through on screen menu.
4. These series of models can set up individual PC name and search the PC by
name.
5. Password setup and management are available. If the password is built, you
must input the correct password to access the target PC.
6. AUTO SCAN function is available, Scan time interval is adjustable.
1. Front Panel Push Buttons
A.Selecting the PC by pressing the front panel push button directly.
B.The Auto Scan button of SLAVE will be disable when in cascade configuration.
2. Hot-key Commands
A. HOT-KEY can be set as <SCROLL > key (original design) or <L-CTRL> (LEFT
CTRL) key.
B. Press HOT-KEY twice (Within 3 seconds) (Remark: Press HOT-KEY only one
time when password is accepted), then into the HOT-KEY MAIN MENU mode.
I.FUNCTION
II.OPERATION
4/8/16 PORT KVM SWITCH
自 多 電 腦 切 換 器
動
1
4/8/16 PORT KVM SWITCH
自 多 電 腦 切 換 器
動
2
Figure(1)
I.FUNCTION……………………………………………………………………………………………2
II.OPERATION………………………………….……………………………………………………..2
1.Front Panel Push Buttons……………………….............................................................2
2.Hot-key Commands…………………………..…………………………………………………….2
3.Using numerical key to select PC…………………………………………………………………3
4.Press <F1> key to activate the AUTO SCAN function………………………………………….3
5.<F2> key SELECT PC function…………………………………………………………………..4
6.<F3> key SEARCH PC function………………………………………………………………….5
7.<F4> key EDIT PC NAME function………………………………………………………………6
8.<F5> key MORE SYSTEM function…………………………………………………………….. 7
9.<F6> key EDIT UNIT/PC PSW……………………………………………………………………8
10.Enable Password………………………………………………………………………………….9
11.<F7> enter OSD position adjustable function………………………………………………. 10
12.<F8> to enter the screen display HELP……………………………………………………… .11
III.FEATURES……………………………................................................................. . ..... 11
IV.SPECIFICATION………………………………………………………………………………… 12
V.INSTALLATION………………………………................................................................12
Configurations…………………………………………………………………………… …… … 1 2
Single Configuration…………………………………………………………………… … … … 1 2
Cascade (Master/Slave) Configuration………...........................................................13
VI.LIMITED WARRANTY……………..……..……………………………………… … … … … … 1 3
VII.TROUBLE SHOOTING………………………………………………… …… … … … … … …. 1 4
Manymanuals.com
Manymanuals.de
Manymanuals.fr
Manymanuals.it
Manymanuals.pl
Manymanuals.cz
Manymanuals.es
Manymanuals-pt.com
Comentarios a estos manuales